Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 51)

Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual 39
Dashboard View Teledyne LeCroy
4.6 Dashboard View
Dashboard View shows state of the link that analyzer is tracking. Click the Dashboard
View icon to view the Dashboard View window for the selected device at the
bottom left of the application.
Figure 4.4: Dashboard View Icon Displaying Device
Dashboard (see Figure 4.5 on page 40 ) displays the following information for Upstream
and Downstream:
 Link Width
 Link speed
 Per lane activity indication
 Green ‐ lane is active, analyzer does not detect any signal errors on this lane
 Orange ‐ lane is active, analyzer detects signal errors on this lane
 Grey ‐ lane is inactive
 Logical to physical lane mapping
 Lane polarity
 Link Number
 NFTS ‐ The number of FTS advertized by the device for each speed
Note: The dashboard display depends on the Recording Options configuration and may
not match the current actual link state. For example, if the analyzer is configured to
track 2.5 GT/s speed only, the Dashboard View will display 2.5GT/s speed as a
current tracking speed regardless of the actual speed of the link.
Check for
Updates Check whether a new software version is available. If so, you can
download from the Teledyne LeCroy web site. 
You can select to Check for updates at application startup
Tell Teledyne
LeCroy Report a problem to Teledyne LeCroy Support via e‐mail. This
requires that an e‐mail client be installed and configured on the
computer.
Shortcuts List Displays a list of Keyboard shortcuts.
About PETracer Displays version information about the attached Analyzer and its
Firmware and BusEngine™.