beautypg.com

Connection procedure, Figure 3.17 on – Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual User Manual

Page 33

background image

    

Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual

21

Using Probes

  Teledyne LeCroy

Figure 3.17: Connecting MidBus Probe Connections

Connect the header on the MidBus probe assembly to the MidBus footprint on the 
System Under Test (host platform or root complex under test). The following picture 
shows two midbus footprints, with one connected to the MidBus probe assembly.

Figure 3.18: Connect MidBus Probe to MidBus Footprint

Connection Procedure

To connect the Summit T3‐16 to the System Under Test (host platform or root complex 
under test: 

1. Connect the MidBus pods to the Analyzer using the iPass Y‐cables.
2. Connect the MidBus probe assemblies to the MidBus pods.
3. Connect the MidBus probe assemblies to the MidBus footprints on the system under 

test.