Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 34)

Teledyne LeCroy Using Probes
22 Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual
4. Connect external reference clock signal to Mid‐Bus External Clock In on Mid‐Bus
probe pod, using external reference clock cable. For x16, you need to chain the
pods.
3.9.2 Example: Connecting the Summit T3-16 Analyzer to the Device Under Test
Using a Gen2 Multi-lead Probe for x1 and x4
Components
 1 iPass Y‐cable for x1 and x4 (see “1 or 2 iPass Y‐cable” on page 19 ).
 1 Multi‐lead Probe Pod for x1 and x4
Figure 3.19: Multi-Lead Probe Pod
 Up to 16 MidBus Probe SSMP Cables, and up to 8 Flexible Leads, per pod
Figure 3.20: Midbus Probe SSMP Cables
 1 Clock Cable (see Figure 3.16 on page 20 ).