Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 109)

Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual 97
Timer Teledyne LeCroy
Figure 5.46: Global and Sequence State Timers
As shown in Figure 5.46 on page 97 there is a Global Timer A, set to the value of 1.000s on
channel Up displayed in blue in the Global State and there is one timer A, set to the value
of 1.000s on channel Down displayed in brown in the Sequence State.
5.23.1 How to Set a Timer
Timers are events and you can add a timer to the Global State or the Sequence State as an
event by doing the following: