Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 17)

Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual 5
Chapter 2
Hardware Description
The PCI Express™ system features Summit Analyzers.
2.1 System Components
Summit T3‐16 system:
 Summit T3‐16™ analyzer box
 One or two (for x8 or x16 recording) iPass Y probe data cables
 PETracer Software program CD‐ROM
 (optional) probes and interposers (see “Adding Devices Manually” on page 11 )
2.2 Host Machine Requirements
The Summit T3‐16 connects to a host machine. Please consult the readme file on the
installation CD for the latest host machine requirements.
2.3 Summit T3-16 Front Panel Description
When powered on, the Summit T3‐16 activates the user‐accessible controls and LEDs on
the front panel.
WARNING: Do not open the enclosure. There are no operator serviceable parts inside.
Refer servicing to Teledyne LeCroy.
The controls and LEDs are:
 Power Switch (black): 1 = On and 0 = Off. Once the analyzer is powered off you
need to wait at least 10 seconds before you power it back on, otherwise the ana‐
lyzer may not initialize properly.
 LCD Menus: Allow you to set up the Summit T3‐16 and view status.
 LCD Menu Navigation Buttons: Allow you to navigate through the LCD menu.
 Speed LEDs: Indicate the current speed for the Upstream and Downstream link.
 Upstream LED: Indicates the activity of the Upstream lanes.
 Downstream LED: Indicates the activity of the Downstream lanes.
 UPSTREAM [15:8] and UPSTREAM [7:0] connectors: Connection to the probe for
the capture of upstream direction of the link.