Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 216)

Teledyne LeCroy Detail View
204 Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual
10.8.10 Using the Legend to Show/Hide Navigator Panes
To use the legend to show/hide an entire pane, use the checkbox next to the name of
each pane in the legend.
In the case of the Pre/Post Trigger and Errors areas, the action of show/hide in the legend
is identical to that provided by CATC Trace Navigator pop‐up menus.
In the case of the Traffic Types pane, there is no equivalent show/hide available through
the pop‐up menus.
10.8.11 Using the Legend to Set the Priority of Information Display
You can use the legend to set the priority of information displayed in the Pre/Post Trigger
Traffic Type panes. This is a two‐step process.
1. For a particular item in a pane, click the column next to the checkbox for the item.
That labels the item as currently active.
2. Next, use the up‐down at the lower‐right of the area to move the item higher or
lower in priority.
In the case of the Traffic Type pane, priority determines display priority of each packet
type. For portions of the CATC Trace that are dominated by a particular packet type, this
setting no effect: only the color corresponding to that packet type is displayed in that
portion of the pane. Suppose, however, that part of the CATC Trace includes equal or near
equal numbers of several types of packets. In that case, you can use the legend to select
which among those types is represented in that portion of the Traffic Types pane. This
allows you to view only packets of interest in crowded portions of the CATC Trace display.
10.9 Detail View
Click to show the Detail View of the selected packet.
Figure 10.24: Detail View