Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 36)

Teledyne LeCroy Using Probes
24 Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual
Connections Overview for Gen2 Multi-lead Probe
Use a 1‐pod or 2‐pod setup depending on the lane width of the recording:
 For x16 recordings, use the 2‐pod setup.
 For all other lane width recordings, use a one‐pod setup.
For x8 and x16, use the straight iPass cables to connect the probe data connectors on the
Analyzer to the pod(s).
On the other side of the pod, connect the flexible lead tips.
Connection Procedure
To connect Summit T3‐16 to the System Under Test (host platform or root complex under
test):
1. Connect the pods to the Analyzer using the straight iPass cables.
2. Connect the flexible lead tips to the pods using the SSMP cables.
3. Connect the lead tips to the system under test by soldering to the trace.