Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 247)

Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual 235
Chapter 11
Updates and Licensing
11.1 Updating the Analyzer
BusEngine™ and/or Firmware updates are now automatic processes that run anytime a
new version of the PETracer™ software is installed that is incompatible with the currently
installed BusEngine or Firmware. The update process generates onscreen instructions.
If, however, you need to manually perform BusEngine or Firmware updates, follow these
steps:
1. Select Setup > Update Device … from the menu to display the Update Analyzer
dialog box for Summit T3‐16™.
2. Select the appropriate file locations for the Firmware and/or BusEngine, using
Browse, if necessary.
3. Check the appropriate options (if in doubt, check all options).
4. Click Update to initiate the updating of the Analyzer.
11.2 License Keys
A License Key is necessary to enable software maintenance. If you attempt to record with
the Analyzer without an installed License Key, a message appears to indicate that a License
Key is necessary in order to record traffic.
A License Key must be obtained from Teledyne LeCroy for each Analyzer.
After you obtain the License Key, follow these steps to install it:
1. Select Setup > All Connected Devices > Update License from the menu bar. to
display the Select License Key File dialog box.
2. Enter the path and filename for the License Key or use the Browse button to
navigate to the directory that contains the License Key.
3. Select the .lic file, and then click Update Device.
11.3 License Information
You can view Licensing information for your Analyzer by selecting Help > Display License
Information... from the menu bar. The License Information window displays data about
the maintenance expiration and purchased features.