Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 127)

Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual 115
Packet Cell Popup Menus Teledyne LeCroy
6.8 Packet Cell Popup Menus
The Packet cell has a right‐click pop‐up menu that includes the Show Raw 10b Codes
command:
6.8.1 Set Start Quick Timing Marker
Sets the start packet for the Quick Timing marker. An S symbol is displayed at the packet.
Quick Timing provides immediate time deltas and bandwidth calculations. If the Start is
placed on a packet that contains an Address and Endpoint, the bandwidth for that
combination is displayed in the Status Bar below the trace data.
Quick Timing Markers are special ""Start"" and ""End"" markers used to mark the
boundaries of the calculations. The results are shown in a special Quick Timing Bar at the
bottom of the TraceView. The markers are set from a context sensitive menu.
6.8.2 Set End Quick Timing Marker
Sets the end packet for the Quick Timing marker. An E symbol is displayed at the packet.
.
6.8.3 Delete All Quick Timing Marker
Deletes all Quick Timing markers.