Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 147)

Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual 135
Go To Marker Teledyne LeCroy
7.6.5 Video Files Supported
The user can attach video clips to the trace file (“add to the marker”). The playback of the
Video clips is limited to the formats that are supported by the video codecs installed in
the system.
7.6.6 Attachment Types and Visualization
The markers are represented graphically by a yellow triangle at the top right of the
marked item and a red vertical bar at the left‐most cell of a packet as shown below.
A marker may comprise any number of attachments of any types.
7.6.7 Embedded Attachments to a Marker
Embedded files are attached to the item marked and transported with the trace. You can
embed the following types of files to a marker:
 Audio Files
 Video Files
 Image Files
 YouTube Files
 Web Pages
 Text Attachments
 Other Attachments
Attachments are embedded in the marker and saved in the trace file. Once attachments
are placed in a marker, the marker can then be presented to a user in a story structured
form. On opening the marker the window resembles the marker editing dialog.
Note: The use of Audio and Video markers is limited to the file types supported on a user’s system.
CATC Walk has been tested with .mp3 and .wmv files, which are supported by Windows as
installed. If additional codecs are installed, they should also work, but it is the user’s
responsibility to choose formats that will work for whomever they intend to exchange CATC
trace files (no different than email attachments in this regard). Because of this dependency on
installed codecs, there are situations where bugs in the codecs supplied by Microsoft or third‐
party applications can prevent proper operation of the Teledyne LeCroy PETracer application.
See the Teledyne LeCroy PETracer Application Read‐Me file for more information if you have
problems with application crashes, etc.
Marked Cell