Teledyne LeCroy Summit T3-16 PCIe Multi-lane Protocol Analyzer User Manual - Manual (Page 25)

Summit T3‐16 PCI Express Multi‐Lane Protocol Analyzer User Manual 13
Cascading with CATC SYNC Expansion Card Teledyne LeCroy
Figure 3.8: Analyzer Network Dialog
The dialog displays the host machines on the network and the Analyzer devices
connected to the host machines.
You can click Add to display the Add Analyzer Network Node dialog, in which you can
select a host machine on the network.
Figure 3.9: Add Analyzer Network Node Dialog
You can also Remove a selected host machine or Reconnect a selected host machine.
3.6 Cascading with CATC SYNC Expansion Card
You can daisy chain two Analyzers, if they both have a CATC SYNC port:
After Analyzers are connected, recording will start simultaneously and triggers will occur
simultaneously, with synchronized timestamps.
You must select both Analyzers in the Device List dialog (see Figure 3.3 on page 9 ).
Important: If you are using other analyzers (NOT PCIe!) in your daisy chain (this would
include USB, DDR, SAS, FC and GigE) and do not wish to use the daisy chaining feature of
synchronized recordings, you must UNPLUG the cable! If you do not unplug, the electrical
signal prevents recording on all Analyzers.