Teledyne LeCroy LabMaster 10Zi Getting Started Manual - Manual (Page 92)

Getting Started Manual
LM10Zi-GSM-E Rev A 85
Vertical
Vertical Overview
You can access Vertical settings using the front panel Vertical controls,
by selecting Vertical→ Channel Setup... on the menu bar, or by
touching the Channel trace descriptor label. The following screen-shot
shows the C1 dialog on a LabMaster. For each open channel trace, a
corresponding Cx dialog opens with setup controls.
The Channel dialog also lets you perform certain actions on the channel
trace, such as Math and Measure, without having to leave the dialog.
NOTE: For LabMaster, the ChannelSYNC Calibration dialog provides
another vertical set up option.
Channel Dialog
The Cx tab of the dialog provides the following functions for the
respective channel:

Selected Input - For each channel, you can set the Channel Input
to either Input A (Upper) or Input B (Lower). The Channel Row
LED Indicators display which input is set for each channel.
NOTE: Not all oscilloscope models have Upper and Lower
Channel Inputs. In those cases, no Selected Input buttons are
provided. The Acquisition Modules indicate alternative, or B
channels, on named LED indicators.

Vertical Scale - For each channel, you can set the vertical scale or
sensitivity and choose whether to use fixed or variable gain
adjustment.