Teledyne LeCroy LabMaster 10Zi Getting Started Manual - Manual (Page 184)

Getting Started Manual
LM10Zi-GSM-E Rev A 177

ASCII -Text output file (.txt extension).

MATLAB - Text output file compatible with MATLAB (.dat
extension).

Excel - Text output file compatible with Excel (.csv
extension).

MathCad - Text output file compatible with Excel (.prn
extension).
Depending on your selection, you may need to touch the
SubFormat control and select a subformat.

Word - Available when selecting the Binary format,
specifies the samples in the output file are represented
with 16 bits. Always use this option unless Byte mode is
pre.

Byte - Available when selecting Binary format, specifies
the samples in the output file are represented with 8 bits.
Note: Using this option can result in a loss of output file
resolution.

Amplitude only - Specifies the output file include
amplitude data for each sample, but not sample time
information.

Time and Amplitude - Specifies the output file include
both time and amplitude data for each sample.

With Header - Specifies to include a header with scaling
information.
If you select ASCII, touch the Delimiter control and select a
delimiter character from the pop-up menu. Choose from comma,
space, semicolon, or tab delimiters.