beautypg.com

Teledyne LeCroy LabMaster 10Zi Getting Started Manual User Manual

Page 29

background image

LabMaster 10 Zi Oscilloscopes

22

LM10Zi-GSM-E Rev A

Now, connect the other end of the 1 Lane cable into the SYNC socket on
the back of the Acquisition Module.

Repeat the previous steps for every additional Acquisition Module in
your system.

PLEASE NOTE THE FOLLOWING:

PCIe 1 Lane Cable plugs are keyed with a single groove along one
wide side of the plug. The plug must be inserted into the socket
with the groove aligned properly.

Connect into your Acquisition Modules from the correct channel
groupings on the Master Control Module; meaning, your first

See also other documents in the category Teledyne LeCroy Equipment: