Teledyne LeCroy LabMaster 10Zi Getting Started Manual - Manual (Page 191)

LabMaster 10 Zi Oscilloscopes
184 LM10Zi-GSM-E Rev A
reconfigure the oscilloscope's connection if it is already
connected to the network or make a new connection.
NOTE: Your instrument allows you to restrict remote control access to
certain clients. To restrict access, under Security, touch the Yes button
and enter the IP addresses or domain name server names you want to
restrict separated by a comma.
C
ONFIGURING THE
R
EMOTE
C
ONTROL
A
SSISTANT
E
VENT
L
OG
1. Under Remote Control Assistant, touch inside the Log Mode
data entry control. Select Off, Errors Only, or Full Dialog from the
pop-up menu.
2. Export the contents of the event log to an ASCII text file by
touching the Show Remote Control Log button. The Event Logs
pop-up is shown.
3. Touch inside the DestFilename data entry control and provide a
file name using your preferred input control method. Additional
information on using the touch screen controls can be found in
the Dialog Area.
4. Then, touch the Export to Text File button.