Teledyne LeCroy LabMaster 10Zi Getting Started Manual - Manual (Page 141)

LabMaster 10 Zi Oscilloscopes
134 LM10Zi-GSM-E Rev A
5. In the mini-dialog to the right of the main setup dialog, touch the
Gate tab to narrow the span of measurement.
6. Touch the Accept tab to define parameter values to be used in
the measurement.
Measure Modes
The selections for Measure Mode allow you to quickly apply parameters
for standard vertical and standard horizontal setups, and custom
setups.
Standard Vertical Parameters
These are the default Standard Vertical Parameters:
mean sdev max. min. ampl pkpk top base
Standard Horizontal Parameters
These are the default Standard Horizontal Parameters:
freq period width rise fall delay duty num
points