Teledyne LeCroy LabMaster 10Zi Getting Started Manual - Manual (Page 90)

Getting Started Manual
LM10Zi-GSM-E Rev A 83
5. Touch inside the First Selected data entry control and select the
first segment you want to display. Use the same method to
provide a value in the Number of Selected data entry control.
NOTE: In Persistence mode, the segments are automatically overlaid
one on top of the other in the display. In non-Persistence mode, they
appear separately on the grid.
Viewing Time Stamps
You can view time stamps for each segment.
View Segment Time Stamps
1. Touch Timebase → Acquisition Status on the menu bar.
OR
Touch Vertical → Channel Status on the menu bar.
2. Touch the Trigger Time tab.
3. Under Show Status For, touch the Time button.
4. Touch inside the Select Segment control and enter a segment
number value (you can also touch the arrow buttons to scroll
through segment times).