Teledyne LeCroy LabMaster 10Zi Getting Started Manual - Manual (Page 201)

LabMaster 10 Zi Oscilloscopes
194 LM10Zi-GSM-E Rev A
Date/Time
From the Date and Time tab on the Utilities dialog, you can set the
oscilloscope date. time, time zones, and daylight savings time.
M
ANUAL
M
ETHOD
Enter the Hour, Minute, Second, Day, Month, and Year. After providing
values, touch the Validate Changes button.
I
NTERNET
M
ETHOD
The oscilloscope must be connected to the Internet through the LAN
port on the I/O panel.
First, verify that your oscilloscope is connected to the Internet, then
touch the Set from Internet button. The Simple Network Time Protocol
(SNTP) is used.
W
INDOWS
M
ETHOD
To set date and time using the internal Windows® system clock, touch
the Windows Date/Time button. Windows displays a Date and Time
Properties pop-up where the date and time can be configured.