Teledyne LeCroy LabMaster 10Zi Getting Started Manual - Manual (Page 20)

Getting Started Manual
LM10Zi-GSM-E Rev A 13
Back of MCM-Zi Master Control Module
Number and Description
1. ChannelSync Outputs -
SMA 10 GHz Clock and
PCIe 1 Lane Control
Connections (for
corresponding
Acquisition Modules)
2. 10 MHz Reference
Clock Output
3. 10 MHz Reference
Clock Input
(Grounded EMI
Shield required when
port is not in use)
4. Removable Storage
Drive
5. AC Power Inlet
6. The I/O Panel
7. DVI-D Video
Output
8. PCIe 4 Lane Data
Inputs (from
corresponding
Acquisition
Modules.
PLEASE NOTE THE FOLLOWING:

Cap-off unused ChannelSync SMA sockets (item number 1 on the
back of your Master Control Module) using the provided chain-
linked 50 Ω terminations (not shown).

10 MHz Reference Clock Inputs are specifically intended for
synchronization with other instruments; not between Master
Control Module and Acquisition Modules.

DVI-D Video Output is for use with an additional external
monitor for Extended Desktop mode.