Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 98)

P A R T T W O : C O M M A N D S
92
ISSUED: February 2005 WM-RCM-E Rev D
ACQUISITION
ARM_ACQUISITION, ARM
Command
DESCRIPTION The ARM_ACQUISITION command arms the scope and forces a
single acquisition if it is already armed.
COMMAND SYNTAX
ARM_acquisition
EXAMPLE The following instruction enables signal acquisition:
CMD$=“ARM”: CALL IBWRT(SCOPE%,CMD$)
RELATED COMMANDS
STOP, *TRG, TRIG_MODE, WAIT, FRTR