Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 242)

P A R T T W O : C O M M A N D S
236
ISSUED: February 2005 WM-RCM-E Rev D
ACQUISITION
*TRG
Command
DESCRIPTION The *TRG command executes an ARM command. *TRG is the
equivalent of the 488.1 GET (Group Execute Trigger) message.
COMMAND SYNTAX
*TRG
EXAMPLE (GPIB) The following instruction enables signal acquisition:
CMD$=“*TRG”: CALL IBWRT(SCOPE%,CMD$)
RELATED COMMANDS
ARM_ACQUISITION, STOP, WAIT, FORCE_TRIGGER