Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 252)

P A R T T W O : C O M M A N D S
246
ISSUED: February 2005 WM-RCM-E Rev D
AVAILABILITY
: {C3, C4} only available on four-channel instruments.
EXAMPLE (GPIB) The following instruction selects the single-source trigger with
Channel 1 as trigger source. Hold type and hold value are chosen as
“pulse smaller” than 20 ns:
CMD$=“TRSE SNG,SR,C1,HT,PS,HV,20 NS”:
CALL IBWRT(SCOPE%,CMD$)