Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 179)

Remote Control Commands and Queries
WM-RCM-E Rev D ISSUED: February 2005
173
ET-PMT
MT_SELECT_TEST, MTST
Command/Query
DESCRIPTION The MT_SELECT_TEST command selects the signal/test type, and
performs “AUTOALIGN” or “HORIZONTAL ALIGN” actions
automatically on the signal.
COMMAND SYNTAX MTST ,, .
:= {NO_TEST, E1TP, E1COAX, E2, E3, E4,
STM1E, DS1, DS3, STS1, STS3E}
:= {C1, C2, C3, C4}
:= {0 to 128}
QUERY SYNTAX MTST?
RESPONSE FORMAT MTST , ,
RELATED COMMANDS CUSTOM_APPLICATION, CUSTOM_OPTIONS?,
MT_FAIL_ACTIONS, MT_OPC?, MT_PF_COUNTERS?,
MT_SYMBOL?