Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control User Manual

Page 249

Remote Control Commands and Queries

WM-RCM-E Rev D

ISSUED: February 2005

243

EXAMPLE (GPIB)

The following instruction configures the logic state of the pattern as
HLXH (CH 1 = H, CH 2 = L, CH 3 = X, CH 4 = H) and defines the

state as NOR.

CMD$=“TRPA C1,H,C2,L,C4,H,STATE,NOR”:
CALL IBWRT(SCOPE%,CMD$)

RELATED COMMANDS

TRIG_COUPLING, TRIG_DELAY, TRIG_LEVEL,
TRIG_MODE, TRIG_SELECT, TRIG_SLOPE