Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 170)

P A R T T W O : C O M M A N D S
164
ISSUED: February 2005 WM-RCM-E Rev D
ACQUISITION
INTERLEAVED, ILVD
Command/Query
DESCRIPTION The INTERLEAVED command enables or disables random
interleaved sampling (RIS) for timebase settings where both single
shot and RIS mode are available.
RIS is not available for sequence mode acquisitions. If sequence mode
is on, ILVD ON turns it off.
The response to the INTERLEAVED? query indicates whether the
oscilloscope is in RIS mode.
COMMAND SYNTAX
InterLeaVeD
: = {ON, OFF}
QUERY SYNTAX InterLeaVeD?
RESPONSE FORMAT
InterLeaVeD
EXAMPLE The following instructs the oscilloscope to use RIS mode:
CMD$=“ILVD ON”: CALL IBWRT(SCOPE%,CMD$)
RELATED COMMANDS
TIME_DIV, TRIG_MODE, MEMORY_SIZE, SEQUENCE