Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 42)

P A R T O N E : A B O U T R E M O T E C O N T R O L
36
ISSUED: February 2005 WM-RCM-E Rev D
Manual Setting of LAN Address
If you do need to set an address for the instrument, go into Windows and perform the usual operations for
setting an address. Before establishing a direct connection between the oscilloscope and the host
computer, the PC must first be properly configured. A specific TCP/IP address must be assigned —
known as "static addressing." But this means that the PC
cannot be set up to obtain its IP address
from a DHCP server. To set the host PC’s static address with Windows 95:
1. Select Star t → Settings → Control Panel.
2. Double-click the Network icon in the Control Panel. A network dialog box similar to this one appears: