Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 227)

Remote Control Commands and Queries
WM-RCM-E Rev D ISSUED: February 2005
221
ACQUISITION
SEQUENCE, SEQ
Command/Query
DESCRIPTION The SEQUENCE command sets the conditions for the sequence
mode acquisition. The response to the SEQUENCE? query gives
the conditions for the sequence mode acquisition. The argument
can be expressed either as numeric fixed point,
exponential, or using standard suffixes.
When Sequence mode is turned on by means of this command,
SMART memory is automatically enabled and the memory length
is set to the user-supplied value.
Sequence mode cannot be used at the same time as random
interleaved sampling (RIS). If RIS is on, SEQ ON will turn RIS
off.
COMMAND SYNTAX
SEQuence [,[,]]
: = {OFF, ON}
: = the right-hand column in the table below:
Max. memory length per
channel
Max. number of segments
10 k 50
25 k 50
50 k 200
100 k 500
200 k 500
250 k 500
500 k 2000
1 M 2000
2 M 2000
: = {…10e+3, 10.0e+3,…11e+3,…}, for
example, in standard numeric format.