Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 210)

P A R T T W O : C O M M A N D S
204
ISSUED: February 2005 WM-RCM-E Rev D
MISCELLANEOUS
PASS_FAIL, PF
Command/Query
DESCRIPTION The PASS_FAIL command sets up the pass/fail system.
COMMAND SYNTAX
PASS_FAIL
[,[,]]
:={ON,OFF}
:={AllTrue,AllFalse,AnyTrue,AnyFalse,
AllQ1ToQ4OrQ5ToQ8,AnyQ1ToQ4AndAnyQ5ToQ8}
:={1 to 1,000,000,000 sweeps}
QUERY SYNTAX PASS_FAIL? or PF?
EXAMPLE (GPIB) The following instruction sets the pass/fail system to all false, and
to stop after 20 acquisitions:
CMD$=”PF ON,ALLFALSE,20”: CALL
IBWRT(SCOPE%,CMD$)
RELATED COMMANDS CRMS