Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 107)

Remote Control Commands and Queries
WM-RCM-E Rev D ISSUED: February 2005
101
FUNCTION
CLEAR_MEMORY, CLM
Command
DESCRIPTION The CLEAR_MEMORY command clears the specified memory. Data
previously stored in this memory are erased and memory space is
returned to the free memory pool.
COMMAND SYNTAX
CLear_Memory
< memory>
: = {M1, M2, M3, M4}
EXAMPLE (GPIB) The following instruction clears the memory M2.
CMD$=“CLM M2”: CALL IBWRT(SCOPE%,CMD$)
RELATED COMMANDS STORE