Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control - Manual (Page 126)

P A R T T W O : C O M M A N D S
120
ISSUED: February 2005 WM-RCM-E Rev D
AVAILABILITY : = {C3, C4} available only on four-channel oscilloscopes.
EXAMPLE (GPIB) The following query reads the measured absolute horizontal value of
the cross-hair cursor (HABS) on Channel 2:
CMD$=“C2:CRVA? HABS”: CALL
IBWRT(SCOPE%,CMD$):
CALL IBRD(SCOPE%,RSP$): PRINT RSP$
Response message:
C2:CRVA HABS,34.2E-6 S, 244 E-3 V