Teledyne LeCroy X-STREAM OSCILLOSCOPES Remote Control User Manual
Page 256
P
A R T
T
W O
:
C O M M A N D S
250
ISSUED: February 2005
WM-RCM-E Rev D
DISPLAY
VERT_POSITION, VPOS
Command/Query
DESCRIPTION
The VERT_POSITION command adjusts the vertical position of
the specified trace on the screen. It does not affect the original
offset value obtained at acquisition time.
The VERT_POSITION? query returns the current vertical
position of the specified trace.
N
N
O
O
T
T
E
E
:
: The VPOS command and query can only be applied to
math function and memory traces. It does not apply to channel
inputs.
COMMAND SYNTAX
TD,M1,M2,M3,M4
} TA through TD are included for backward
compatibility with software designed for earlier LeCroy instruments.
These four mnemonics will not be returned in response to queries.
N
N
O
O
T
T
E
E
:
: The unit DIV is optional. The limits depend on the
current magnification factor, the number of grids on the
display, and the initial position of the trace.
QUERY SYNTAX
RESPONSE FORMAT
EXAMPLE
The following instruction shifts Trace A (TA) upwards by +3
divisions relative to the position at the time of acquisition:
CMD$=“F1:VPOS 3DIV”: CALL IBWRT(SCOPE%,CMD$)
RELATED COMMANDS
VERT_MAGNIFY