Gilderfluke&Co Sd-50 Audio & Show Controllers - Manual (Page 86)

Track Setup
(Sd-50/0, Sd-50/8, and Sd-50/40)
The .mp3 and .wav SoundFiles are entered and sorted on this menu tab of the ‘Mp3 Config.exe’ pro-
gram. To find your SoundFiles, you must point it to the disk that contains your .mp3 and .wav files. This is
usually the Sd/MMC flash card that will be inserted in the Sd-50/xx. Up to 255 .mp3/.wav audio files can
be loaded onto the Sd-50/xx’s Sd/MMC flash card at the same time.
1) Move Up
2) Move Down
You must have previously selected one of the SoundFiles from your list at the bottom of this
window to use this command.
The SoundFiles are loaded in ‘Windows’ order by default. This button allows you to select and reorder the
SoundFiles on the Sd/MMC flash card. The first two columns show the number of the track, then the original num-
ber of the track before it was moved up or down in this list (in this example, SoundFiles #10 and #11 have been
switched).
3) Reload Track List From Directory
This button is used to refresh the list of SoundFiles loaded on the Sd/MMC flash card. It is used when you have
changed the name or number of SoundFiles loaded on the Sd/MMC flash card.
4) At End
You must have previously selected one of the SoundFiles from your list at the bottom of this
window to use this command.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Sd-50/xx Manual / October 29, 2012 2:29 PM / page 86 of 120