Care & feeding of an gps receiver, Gps receivers – Gilderfluke&Co Sd-50 Audio & Show Controllers User Manual
Page 113

Care & Feeding of an GPS Receiver
(Sd-50/GPS8 or Sd-50/GPS40)
The GPS option adds a commercially made GPS receiver to the Sd-50/8 or Sd-50/40. The GPS option
will work anywhere on the planet.
The receiver is mounted anywhere where it has a view of the sky. The GPS receivers are IPx7 rated
for outdoor use, and are ‘bulkhead’ mounted using a single 5/8” diameter hole.
The fifteen foot long cable from the GPS receiver plugs into a small GPS power module via a six pin
mini-DIN connector. A three conductor cable with 2.5 mm stereo plugs at both ends is then connected be-
tween the power module and the Sd-50/8 or Sd-50/40.
The input to the Sd-50/8 or Sd-50/40 is optically isolated. You can stretch these wires for hundreds of
feet, if needed.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Sd-50/xx Manual / October 29, 2012 2:29 PM / page 113 of 120