beautypg.com

Gilderfluke&Co Sd-50 Audio & Show Controllers User Manual

Page 42

background image

If the loads you are controlling with the the Sd-50/8 or Sd-50/40 controller are at a higher voltage and/

or current than it will provide directly, then relays can be added on the Show Control Outputs (or DMX-512
Outputs) to control any sized loads.

You can provide these relays yourself, or Gilderfluke & Co. has several ready-to-use relay boards

available:

DPDT relay board: A set of eight electromechanical relays with double pole/double throw contacts

rated at five amps each. Connected to the Sd-50/8 or Sd-50/40 controller by a

" J6

’ ribbon cable

from the Digital Show Control outputs.

Reed relay board: A set of eight small electromechanical relays with normally open contacts rated at

150 ma each. Connected to the Sd-50/8 or Sd-50/40 controller by a

" J6

ribbon cable from the

Digital Show Control outputs.

Solid State Relay Fanning Strip: For connecting up to eight popular ‘hockey puck’ style relays to a ‘

"

J6

’ output cable. These are available with capacities of up to 75 amps each. Connected to the Sd-

50/8 or Sd-50/40 controller by a ‘

" J6

ribbon cable from the Digital Show Control outputs.

Pb-08, Pb-16, Pb-24 or Pb-32: Small AC (Alternating Current) or DC (Direct Current) relays rated for

3.5 amps each. Each relay is protected by an easily replaced standard fuse. Connected to the Sd-
50/8
or Sd-50/40 controller by a ‘

J6

ribbon cable from the Digital Show Control outputs.

Pb-DMX/08, Pb-DMX/16, Pb-DMX/24 or Pb-DMX/32: Small AC (Alternating Current) or DC (Direct

Current) relays rated for 3.5 amps each. Each relay is protected by an easily replaced standard
fuse. Connected to the Sd-50/8 or Sd-50/40 controller by a single twisted pair of wires from the
DMX-512 outputs.

LC-8SP: A set of eight solid state relays with mounted in a 19” rack mountable metal box. Line cord in,

and eight individual duplex outlets for connecting you loads. Connected to the Sd-50/8 or Sd-50/40
controller by a

" J6

ribbon cable from the Digital Show Control outputs.

Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485

Sd-50/xx Manual / October 29, 2012 2:29 PM / page 42 of 120