Gilderfluke&Co Sd-50 Audio & Show Controllers - Manual (Page 119)

FCC and CE Compliance:
Sd-50s, Sd-50/8 and Sd-50/40 which are hardware revision
1.0 or later have been tested to comply with FCC and CE re-
quirements. Revisions earlier than this may have passed test-
ing, but were not certified at the time of manufacture.
Because Sd-50s, Sd-50/8 and Sd-50/40 are low voltage DC
devices, neither UL or CE require safety testing.
For fireproofing or additional radio frequency interference
shielding, Sd-50s, Sd-50/8 and Sd-50/40 can be mounted in a
fire rated metallic case. Typically, this would be a NEMA-rated
electrical enclosure or 19” electrical rack.
FCC Instruction to User:
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installa-
tion. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television recep-
tion, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and re-
ceiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
This equipment has been verified to comply with the limits for a
class B computing device, pursuant to FCC Rules. In order to
maintain compliance with FCC regulations, shielded cables
must be used with this equipment. Operation with non-
approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned
that changes and modifications made to the equipment without
the approval of manufacturer could void the user's authority to
operate this equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful
interference and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
This Class B digital apparatus meets all require-
ments of the Canadian Interference-Causing
Equipment Regulations.
Cet appareil numerique de la classe B respecte
toutes les exigences du Reglement sur le
materiel brouilleur du Canada.
EC DECLARATION OF CONFORMITY
Monday, October 29, 2012
Application of Council Directives:! ! ! ! EMC Directive, 89/336/EEC
Manufacturer's Name:! ! ! ! ! Gilderfluke & Co., Inc.
Manufacturerʼs Address:! ! ! ! ! 205 South Flower St., Burbank, California 91502 USA
Importerʼs Name:! ! ! ! ! ! ! ! ! ! ! ! !
Importerʼs Address:! ! ! ! ! ! ! ! ! ! ! ! !
Type of Equipment:! ! ! ! ! ! Entertainment and Lighting Control
Equipment Class:! ! ! ! ! ! Commercial and Light Industrial
Model:! ! ! ! ! ! ! Sd-50, Sd-50/8, Sd-50/40
Conforms to the following Standards:! ! ! EN 55103-1: 1996 and EN 55103-2: 1996
Year of Manufacture:! ! ! ! ! 2006
I the undersigned, hereby declare that the equipment specified above conforms to the above directive(s)
and standard(s).
Place:!Burbank, California! ! ! ! ! Signature:! (signed)! ! ! !
Date: August 1, 2006! ! ! ! ! Full Name:! Doug Mobley
! ! ! ! ! ! ! ! Position:! CEO
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Sd-50/xx Manual / October 29, 2012 2:29 PM / page 119 of 120