beautypg.com

Gilderfluke&Co Sd-50 Audio & Show Controllers User Manual

Page 68

background image

8) The current status of the D/White optically isolated input. Input will show whether it is ‘opened’ (no

current flowing) or ‘closed’ (current flowing through the input).

If the option to enable/disable the Real Time ‘Atomic’ Clock has been selected from the ‘Mp3
Config.exe
’, the line which shows the status of the ‘ D/White’ input will also show whether the
clock is currently enabled or not. A closure on the ‘ D/White’ input will enable the Real Time
‘Atomic’ Clock
. Note that this input ‘fails safe’. An opening disables the scans of the schedules,
and a closure enables them.

9) RTC input Status:

A) If GPS data is being received, it displays the GPS geographic data.

a) Latitude

b) Longitude

c) Elevation

d) Speed

e) Heading

f) Number of satellites being received

g) Horizontal Dissolution of Precision: This is an indication of the relative accuracy of

the signal being received. The more satellites being used, the greater the accuracy
of the received signal.

B) If ‘Atomic’ clock input is enabled on the RTC input:

a) The current status of the D/White optically isolated input. Input will show whether it

is ‘opened’ (no current flowing) or ‘closed’ (current flowing through the input).

b) The time which has been set to jamb into the clock on each closure.

10) AutoDownload ‘Set’ information.

a) Name of the AutoDownload File (in DOS 8.3 format).

b) Number of shows in AutoDownload file.

c) Number of channels in AutoDownload file.

d) Offset to first channel stored in AutoDownload file.

11) Information on the currently loaded show.

a) Name of the Show (in DOS 8.3 format).

b) Status of the show:

i)

Stopped

ii) Playing (at the end of the show it will stop)

iii) Looping (at the end of the how, it may or may not play another show. A message

will be displayed if it has been set to do nothing at the end of this show.

iv) Paused. Playing or Looping, but it has been paused.

c) Frame number that the show is at.

12) Information on the currently loaded SoundFiles.

a) Name of the Show (in DOS 8.3 format).

b) Status of the Sound playback:

i)

Stopped

Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485

Sd-50/xx Manual / October 29, 2012 2:29 PM / page 68 of 120