Gilderfluke&Co Sd-50 Audio & Show Controllers - Manual (Page 45)

c.2)
If 63 or less SoundFiles are found, then the Animation ‘Virtual’ Audio Trigger Input bit
#6 becomes full mute in one second on closing, and unmute in one second upon
opening.
c.3)
If 31 or less SoundFiles are found, then the Animation ‘Virtual’ Audio Trigger Input bit
#5 becomes half mute in one second on closing, and unmute in one second upon
opening.
c.4)
If 15 or less SoundFiles are found, then the Animation ‘Virtual’ Audio Trigger Input bit
#4 becomes unmute in one second on closing.
Sd-50/40 Defaults
All settings the same as the Sd-50/8, except
MPU triggers addressed at 05h, Volume left @ 06h (but disabled), Volume right @ 07h (but disabled), First
ServoMotor @ 06h (but disabled).
Sd-50/WWV8 Defaults (w/ ʻatomicʼ clock)
All settings the same as the Sd-50/8. Reset the RTC enabled and set for 3:05:00 AM, and the Schedule disable
on C/Blue is disabled.
Sd-50/WWV40 Defaults (w/ ʻatomicʼ clock)
All settings the same as the Sd-50/40. Reset the RTC enabled and set for 3:05:00 AM, and the Schedule dis-
able on C/Blue is disabled.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Sd-50/xx Manual / October 29, 2012 2:29 PM / page 45 of 120