Extron Electronics DVS 510 Series User Guide - Manual (Page 96)

DVS 510 Series • HTML Configuration and Control 90
Date/Time Settings section
The fields in the Date/Time Settings section enable you to view and set the date and time
parameters.
Figure 42. Date/Time Settings Fields
To change the date and time settings:
1. In each Date or Time field that you want to change, select the desired value from the
drop-down menu or key it in the field. (The
Month drop-down box is selected in the
figure above); or
Click the
Local Date/Time button to set the date and time to your local settings.
2. From the Zone menu, select your time zone. The selection displayed in the Zone field
identifies the standard time zone and the amount of time, in hours and minutes, that
local time varies from the Greenwich Mean Time (GMT) international time reference.
3. If daylight saving time is currently in effect in your area, select the radio button for the
area. If daylight saving time is not in effect or is not observed, select
Off .
NOTE: When daylight savings time is enabled, the scaler updates its internal clock
between standard time and daylight savings time in the spring and fall on
the date that the time change occurs in the United States of America and
parts of Europe and Brazil. When daylight savings time is turned off, the
scaler does not adjust its time reference.
4. Click the Submit button at the bottom of the Date/Time Settings section to implement
your selections.