Extron Electronics DVS 510 Series User Guide - Manual (Page 72)

DVS 510 Series • Remote Configuration and Control 66
Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
Resets
Erase flash memory
24 E ZFFF } Zpf ] Clear all data from flash memory.
Reset audio settings E ZA } Zpa ] Reset the audio input gain and global
treble and bass settings to 0.
Reset all audio settings E ZAAA } Zaa ] Reset all audio settings to the factory
defaults.
Reset all settings to
factory defaults E ZXXX } Zpx ] Reset all settings and adjustments to the
factory default settings.
Absolute system reset E ZQQQ } Zpq ] Reset all settings and adjustments to
the factory defaults, the IP address to
192.168.254.254, and the subnet mask
to 255.255.0.0.
System reset retaining
IP settings E ZY } Zpy ] Reset all settings and adjustments to the
factory default settings except IP settings:
IP address, subnet mask, gateway IP
address, unit name, DHCP setting, and
port mapping (Telnet, web, and direct
access). This preserves communication
with the device, and is recommended
after a firmware update.