Configuration pages – Extron Electronics DVS 510 Series User Guide User Manual
Page 94
DVS 510 Series • HTML Configuration and Control
88
Configuration Pages
The
Configuration
tab contains four pages that only an administrator can access. These
pages are listed in the left sidebar menu on the
Configuration
tab. The following sections
describe the changes you can make from these pages.
System Settings Page
The DVS 510 displays the System Settings page when you click the
Configuration
tab.
The screen consists of fields in which you can view and edit IP administration and system
settings. The Scaler Settings, Passwords, and Firmware Upgrade pages can be accessed by
clicking the appropriate link on the left sidebar menu. (See “
for basic information about IP addresses and subnetting.)
Figure 41.
System Settings Page
On password-protected connections, there are two levels of protection: administrator and
user. Administrators have full access to all scaling capabilities and editing functions. Users
can select inputs, create and recall presets, and view all settings with the exception of
passwords.
•
Ethernet connection to the scaler can be password protected, either entering SIS
commands (see the “
Remote Configuration and Control
”
section, beginning on
page 47) or using the Signal Processing Products Control Program (see the program help
file).
•
Connection via RS-232 or RS-422 is not password protected.