Extron Electronics DVS 510 Series User Guide User Manual
Page 78
DVS 510 Series • Remote Configuration and Control
72
Command
ASCII Command
(Host to Scaler)
Response
(Scaler to Host)
Additional Description
IP Setup Commands (continued)
Set Daylight Saving Time
24
E
X10#
CX
}
Ipx
X10#
]
Set daylight saving time
X10#
:
0 = off or ignore
1 = USA (Begins second Sunday
in March and ends first
Sunday in November.)
2 = Europe (Begins last
Sunday in March and
ends last Sunday in
October.)
3 = Brazil (Begins third Sunday
in October and ends third
Sunday in February.)
View Daylight Saving
Time
E
CX
}
X10#
]
Set DHCP on
24
E
1DH
}
Idh1
]
Set Dynamic Host Configuration
Protocol (DHCP) to On. The
DVS automatically obtains its IP
address from the local network.
Set DHCP off
24
E
0DH
}
Idh0
]
Set DHCP to Off.
View DHCP mode
E
DH
}
X1)
]
For
X1)
:
1 = DHCP is on.
0 = DHCP is off.
Set IP address
E
X8$
CI
}
Ipi •
X8$
]
X8$
= IP address
(nnn.nnn.nnn.nnn). Leading
zeros in the octets are optional.
View IP address
E
CI
}
X8$
]
Leading zeros are suppressed in
returned values.
View hardware (MAC) address
E
CH
}
X8(
]
In verbose mode:
Iph •
X8(
]
X8(
= hardware media
access control (MAC) address
(xx-xx-xx-xx-xx-xx).
View number of open
connections
E
CC
}
Number of connections
In verbose mode:
Icc Number of connections
]
Set subnet mask
E
X9)
CS
}
Ips •
X9)
]
X9)
= subnet mask
(nnn.nnn.nnn.nnn). Syntax is
the same as for IP addresses.
Leading zeros are optional in the
octets.
View subnet mask
E
CS
}
X9)
]
Leading zeros are suppressed in
returned values.
Set gateway IP address
E
X8$
CG
}
Ipg
X8$
]
X8$
= IP address
(nnn.nnn.nnn.nnn). Leading
zeros are optional.
View gateway IP address
E
CG
}
X8$
]
Leading zeros are suppressed in
returned values.
Set DNS server IP address
E
X8$
DI
}
Ipd •
X8$]
Set the IP address
X8$
for the
Domain Name System (DNS) in
the format (nnn.nnn.nnn.nnn).
Leading zeros in the octets are
optional.
View DNS server IP address
E
DI
}
X8$
]
Leading zeros are not shown
response.