Extron Electronics DVS 510 Series User Guide - Manual (Page 33)

DVS 510 Series • Operation 27
Resolution 23.98 Hz 24 Hz 25 Hz 29.97 Hz 30 Hz 50 Hz 59.94 Hz 60 Hz 75 Hz
640 x 480 X X X
800 x 600 X X X
852 x 480 X X X
1024 x 768* X X* X
1024 x 852 X X X
1024 x 1024 X X X
1280 x 768 X X X
1280 x 800 X X X
1280 x 1024 X X X
1360 x 765 X X X
1360 x 768 X X X
1365 x 768 X X X
1366 x 768 X X X
1365 x 1024 X X X
1440 x 900 X X X
1400 x 1050 X X
1680 x 1050 X X
1600 x 1200 X X
1920 x 1200 X X
480p X X X X
576p X
720p X X X X X X
1080i X X X
1080p X X X X X X X X
2048 x 1080 X X X X X X X X
*Default resolution
NOTE: The default refresh rate of 60 Hz is applied when the DVS switches to a different
resolution except for 576p, for which it defaults to 50 Hz.
Output Type submenu
Rotate either the horizontal ([) or the vertical ({) Adjust knob to select the output video
format required by the display. Available signal types are RGBHV (default), RGBS, RGsB, YUV
bi-level, and YUV tri-level.
Sync Polarity submenu
The display device may require a particular combination of horizontal (H) and vertical (V)
sync signal polarities. Select the appropriate combination of positive or negative H and V
sync by rotating either the horizontal ([) or vertical ({) Adjust knob. Options are
H-V-
(default), H+V- , H-V+ , or H+V+ .
NOTE: This submenu applies only to RGBHV format. For all other output formats, N/A i s
displayed for this submenu.