Extron Electronics DVS 510 Series User Guide User Manual

Page 52

DVS 510 Series • Operation

Image Adjustment buttons — Let you make adjustments to the appearance of the

image on the screen, including color, tint, contrast, brightness, and sharpness (Detail).
For each of these controls, there are two buttons: + to increase the image property and
– to decrease it. You can also freeze the image on the screen (the Freeze button has no
equivalent on the front panel).
To adjust the image using the remote control buttons:

Aim the IR 904 remote control at the front panel IR sensor.

While watching the display, press repeatedly or press and hold the + or – button for
the desired picture control until the desired appearance is achieved.

COLOR

CONT

DETAIL

IMAGE ADJUSTMENTS

TINT

BRIGHT

FREEZE

Figure 27.

IR 904 Image Adjustment Buttons

Tint buttons — Change the appearance of the colors on the screen.

Bright buttons — Set the black level of the current input.

Freeze button — Freezes the image on the screen. To unfreeze the image, press
this button again.

Detail buttons — Adjust the sharpness of the image.

Cont buttons — Increase or decrease the range of image light and dark values
(contrast).

Color buttons — Adjust the color intensity (at the lowest level, all colors are
shades of gray).

Audio Mute button — Toggles audio output muting on and off.

Video Mute button — Toggles video output muting (hiding) on and off.

AV Mute button — Mutes and unmutes both video and audio simultaneously.