Extron Electronics DVS 510 Series User Guide - Manual (Page 92)

DVS 510 Series • HTML Configuration and Control 86
4. Press the key. The DVS checks to see if it is password protected.
• If the scaler is not password protected, the System Status web page opens.
• If the DVS is password protected, the network password dialog box is displayed.
Figure 39. Example of a Network Password Dialog Box
5. If an administrator or user password is required, enter it in the Password field. If desired,
select the check box to have the system input your password the next time you enter
your DVS IP address. Click
OK .
NOTE: A User name entry is not required.
The DVS 510 checks several possibilities, in the following order, and then responds
accordingly:
a. If the address includes a specific file name, such as
10.13.156.10/file_name.html , the scaler downloads that HTML page.
b. If there is a file in the DVS memory that is named index.html, the scaler downloads
index.html as the default startup page.
c. If neither of the above conditions exists, the scaler downloads and displays the
factory-installed default startup page, nortxe_index.html, which is the file name for
the System Status page.
Special Characters
The HTML language reserves certain characters for specific functions. The DVS does not
accept these characters as part of preset names, the scaler name, passwords, or locally
created file names.
Use of the following characters is not recommended:
+ ~ , @ = ` [ ] { } < > ’ ‘ “ ” ; : | \ ? and space.