Extron Electronics DVS 510 Series User Guide - Manual (Page 90)

DVS 510 Series • Remote Configuration and Control 84
8. Click Begin. The following indicators on the Firmware Loader window show the
progress of the update:
• The Transfer Time field shows the amounts of remaining and elapsed time for the
update.
• The Total Progress field displays a status bar with Uploading... above it.
• In the Devices section, the Progress column displays an incrementing percentage
and the Status column displays Uploading .
Figure 38. Firmware Upload in Progress
When the upload is complete, the Remaining Time field shows 00.00.00 , the
Progress column shows 100% , and Completed is displayed above the progress bar and
in the Status field.
At this point, the DVS resets itself. The LCD screen on the unit displays Restarting
Please Wait... , then Initializing Please Wait... . When the reset is complete,
all the buttons on the front panel flash red, then green, then amber; and the LCD screen
returns to the default cycle.
9. When the firmware upload and unit reset are complete, close the Firmware Loader
window. The SPPCP window is redisplayed.