Extron Electronics DVS 510 Series User Guide - Manual (Page 114)

DVS 510 Series • Reference Information 108
Video output
Number/signal type ........................ 2 scaled RGBHV, RGBS, RGsB; Y, R-Y, B-Y
1 scaled DVI/HDMI (HDCP compliant)
Connectors .................................... 2 female 15-pin HD
1 female DVI-I (only digital signal active)
Nominal level ................................. 1 Vp-p for Y of component video and for G of RGsB
0.7 Vp-p for RGB and for R-Y and B-Y of component video
Minimum/maximum levels .............. 0 V to 0.7 Vp-p
Impedance ..................................... 75 ohms
Vertical frequency ........................... 50 Hz, 60 Hz, or 75 Hz, depending on selected output resolution
Scaled resolutions ........................... 640x480
1,2,3 , 800x600 1,2,3 , 852x480 1,2,3 , 1024x768 1,2,3 , 1024x852 1,2,3 ,
1024x1024 1,2,3 , 1280x768 1,2 , 1280x800 1,2 , 1280x1024 1,2,3 , 1360x765 1,2,3 ,
1360x768 1,2,3 , 1365x768 1,2,3 , 1366x768 1,2,3 , 1365x1024 1,2,3 , 1400x1050 1,2 ,
1440x900 1,2,3 , 1600x1200 1,2 , 1680x1050 1,2 , 1920x1200 1,2 , 2048x1080 1,2,4,5,6,7,8,9 ,
480p 2,9 , 576p 1 , 720p 1,2,6,7,8,9 , 1080i 1,2,9 , 1080p 1,2,4,5,6,7,8,9
1 = at 50 Hz, 2 = at 60 Hz, 3 = at 75 Hz, 4 = at 23.98 Hz, 5 = at 24 Hz, 6 = at 25 Hz,
7 = at 29.97 Hz, 8 = at 30 Hz, 9 = at 59.94 Hz
Return loss ..................................... -21 dB @ 5 MHz
DC offset ....................................... ±300 mV maximum with input at 0 offset
Sync
Input type ...................................... RGBHV, RGBS, RGsB, bi-level or tri-level component video
Output type ................................... RGBHV, RGBS, RGsB; Y, R-Y, B-Y (bi-level or tri-level)
Input standards .............................. NTSC 3.58, NTSC 4.43, PAL, SECAM
Input level ...................................... 2.75 Vp-p to 5.0 Vp-p for RGBHV or RGBS
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
Output level ................................... TTL: 5.0 Vp-p, unterminated
0.6 Vp-p for component video tri-level sync
0.3 Vp-p for component video bi-level sync or RGsB
Input impedance ............................ 75 ohms for horizontal; 510 ohms for vertical
Output impedance ......................... 75 ohms
Polarity ........................................... Positive or negative (selectable)
Audio
Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB
Frequency response ........................ Fixed and variable: 20 Hz to 20 kHz, ±1.5 dB
THD + Noise ................................... Variable: <0.11% at 1 kHz, 20 kHz bandwidth
Fixed: <0.025% at 1 kHz, 20 kHz bandwidth
S/N ................................................. Variable: 90 dB at rated maximum output
Fixed: 90 dB at rated maximum output
Crosstalk ........................................ -80 dB at 1 kHz, fully loaded
Stereo channel separation .............. 84 dB at 1 kHz
Bass ............................................... ±12 dB at 100 Hz
Treble ............................................. ±12 dB at 10 kHz
Audio input
Number/signal type ........................ 10 stereo, balanced or unbalanced
Connectors .................................... (10) 3.5 mm 5-pole captive screw connectors (stacked)
Impedance ..................................... >10k ohms balanced/unbalanced, DC coupled
Nominal level ................................. +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level ............................... +10.4 dBu, (balanced or unbalanced) at 1% THD+N
Input gain adjustment .................... -12 dBu to +12 dBu, adjustable to input
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu