Html configuration and control, Section, Html – Extron Electronics DVS 510 Series User Guide User Manual
Page 91: Configuration and control, Accessing the web pages

DVS 510 Series • HTML Configuration and Control
85
85
HTML
Configuration and
Control
This section provides procedures for accessing and using the DVS 510 embedded web pages.
The following topics are included:
•
•
•
•
•
•
The DVS can be controlled and operated through its Ethernet port, connected via a LAN or
WAN and using a web browser such as Microsoft
®
Internet Explorer
®
. The browser displays
the DVS web pages, which provide an alternative means of configuring and operating
the scaler. These factory-installed web pages are always available and cannot be erased or
overwritten.
NOTE: If your Ethernet connection to the scaler is unstable, try turning off the proxy
server in your web browser. To do this in Microsoft Internet Explorer, click
Tools
>
Internet
Options
>
Connections
>
LAN Settings
, clear the
Use
a
proxy
server...
check box, then click
OK
.
Accessing the Web Pages
Access the HTML pages as follows:
1.
Start the web browser program.
2.
Click in the browser
Address
field and enter the IP address of your DVS.
NOTE: If the local system administrators have not changed the value, use the
factory-specified default
192.168.254.254
in this field.
3.
If you want the browser to display a page other than the default page (such as a custom
page that you have uploaded), enter a slash (/) following the IP address and the name of
the page file to open.
NOTES:
•
The browser
Address
field should display the IP address in the following
format:
nnn.nnn.nnn.nnn/optional_file_name.html.
•
The following characters are invalid or not recommended in file names:
+ ~ , @ = ` [ ] { } < > ‘ ’ “ ” ; : | \ and space.