Extron Electronics DVS 510 Series User Guide - Manual (Page 28)

DVS 510 Series • Operation 22
User Presets Menu
User presets save the current set of image parameters for the selected input. Each input has
16 available user memory presets to which you can save settings or recall using this menu,
an SIS command (see the
User presets commands in the Command and Response Table for
SIS Commands on page 62) or the Presets web page (see “ Memory/Input Presets Page ”
on page 102).
The following settings are saved in a user preset:
• Color • Horizontal position
• Tint • Vertical position
• Contrast • Horizontal size
• Brightness • Vertical size
• Detail • Pan
• Zoom
Saved user presets can be recalled to be applied to the current input.
The following flowchart provides an overview of the User Preset submenus and the options
for each setting.
Next
Recall Preset
<16>
Save Preset
Next
User
Presets
Menu
Default
Cycle
Use either Adjust knob to
select a submenu option.
• NA
• 1 through 16
• NA
• 1 through 16
Next
Figure 14. User Presets Menu
Saving or recalling a user preset
1. Press the Menu button until User Presets is displayed in the LCD window.
2. Press the Next button until the desired submenu name is displayed: Recall Preset or
Save Preset .
3. Rotate either Adjust knob until the LCD screen displays the number of the preset to
which you want to save the current settings, or that you want to recall.
4. Press Next to save or recall the preset. The User Presets menu is displayed.
To exit the user presets function without saving a preset, press Menu.
NOTES: • The presets are saved in nonvolatile memory; therefore, powering down the
DVS does not lose the presets.
• User presets can be saved at one input resolution and rate and recalled to a
different one.
Example: If the current output resolution is 1024x768 and a 720p input is
applied, you can size and center a “letterbox” image for a 16:9 input resolution
and save it to a user preset. Subsequently, if a 1080p resolution is applied to the
unit, the letterbox preset that was saved at 720p can be recalled with the new
1080p input resolution.