Extron Electronics DVS 510 Series User Guide - Manual (Page 39)

DVS 510 Series • Operation 33
Alt Pixels
4x4 Crosshatch
Crosshatch
Grayscale
Color Bars
Ramp
Crop
1.78 Aspect
1.85 Aspect
2.35 Aspect
1.33 Aspect
White Field
Blue Mode
Figure 19. DVS 510 Series Test Patterns
To select a test pattern:
1. From the Advanced Configuration menu, press Next until the Test Pattern submenu is
displayed.
2. Rotate either Adjust knob to select a test pattern. The default is Off (no test pattern).
Internal Temp. screen
The Internal Temp. screen shows the current internal temperature of the DVS unit in degrees
Fahrenheit and Celsius. This is an information-only screen; no adjustments can be made
from it.
Reset to Factory screen
This screen lets you reset the DVS to the default settings with which it was delivered from
the factory. To reset the unit:
1. From the Advanced Configuration menu, press Next until the Reset to Factory Press
Detail screen is displayed. The Detail button under Picture Controls begins to blink.
2. To initiate the reset, press Detail. When the reset is complete, the default cycle is
displayed.