Configuring password, 5 configuring password – ZyXEL Communications ZyXEL ZyAIR 100 User Manual
Page 64

ZyWALL 10~100 Series Internet Security Gateway
4-4
System
Table 4-2 DDNS
LABEL DESCRIPTION
Enable Wildcard
Select the check box to enable DYNDNS Wildcard.
Off Line
This option is available when CustomDNS is selected in the DDNS Type field.
Check with your Dynamic DNS service provider to have traffic redirected to a
URL (that you can specify) while you are off line.
Edit Update IP Address:
Server Auto Detect Select this option to update the IP address of the host name(s) automatically by
the DDNS server. It is recommended that you select this option.
User Specify Select this option to update the IP address of the host name(s) to the IP address
specified below. Use this option if you have a static IP address.
IP Addr Enter the IP address if you select the User Specify option.
Apply
Click Apply to save your changes back to the ZyWALL.
Reset
Click Reset to begin configuring this screen afresh.
4.5 Configuring
Password
To change your ZyWALL’s password (recommended), click SYSTEM, then the Password tab. The screen
appears as shown. This screen allows you to change the ZyWALL’s password.
Figure 4-3 Password
The following table describes the fields in this screen.